On Cloudpulse review

Having put the Cloudpulse through the rigors of gym training, we can confirm that it can make a great option for the following people:

• athletes who primarily focus on HIIT and cardio at the gym
• fans of the On brand who would like to experience its leading technologies in a training shoe
• folks with wider feet and those who are used to having a roomy toebox in their gym shoes

If you are considering the Cloudpulse for Crossfit and weightlifting, we recommend looking towards more stable and sturdy options like the Nike Metcon 9. It is much more suitable for lifting weights over 200 lbs (90 kg).

We are surprised that On positions the Cloupulse as its first-ever trainer for the gym because the brand already has options like the Cloud X 3 and the Cloud X 3 AD among others. These trainers are more minimal, much lighter, and more flexible than the Cloudpulse which makes them more suitable for a mix of moderate workouts and casual wear.

As you focus on achieving results at the gym, you certainly don't want to be bothered by wet and stinky feet. The Cloudpulse will take your worries away with its thoughtfully engineered mesh upper.

The smoke we pumped into the shoe's upper passed right through the fabric within a few seconds! This proved that the pores are large enough to maintain unobstructed airflow inside the shoe.

In a closer look through our microscope, we also saw how thin threads are helping to make the shoe's ventilation holes larger.

No matter how heated your HIIT session gets, the On Cloudpulse will keep it cool. Thus, we gave it the highest breathability score of 5 out of 5.

Keeping things light and airy in the upper, the Cloudpulse lost some points in the durability department.

Our Dremel test revealed that the mesh fabric used for the shoe's toebox is too frail to sustain any serious slashes against the floor or gym equipment. Not to mention that a single rope climb can burn right through the material.

As you can see from the photo above, a 12-second contact with sandpaper at a 5K RPM speed left a see-though hole in this On trainer. This is a definite 1 out of 5 for toebox durability.

On the bright side, the inner lining of the Cloudpulse proved to be much tougher than the toebox. We found that it is ready for the aggressive chafing that comes with intensive workouts.

Our Dremel left just a minor scuff on the inner side of the shoe's heel counter, earning it a high durability score of 4 out of 5.

Our lab tests showed that On invested in the Cloudpulse's outsole durability as well!

It proved to be just as hard as the average training shoe outsole, according to our Shore C durometer. With a reading of 79.6 HC, it is on par with the industry average.

Looking at how well the Cloudpulse resisted our outsole Dremel test, we think that it is very likely to fare well over the long term.

Even after 22 seconds of drilling it at a demanding speed of 10K RPM, the Dremel burned a mere 0.3 mm of rubber! That's an impressive result for a gym shoe.

Considering how sturdy the shoe's rubber compound is, we are not worried about its outsole thickness being thinner than average at 2.1 mm.

Overall, we are impressed with the sturdy construction of the Cloudpulse and believe that it can last forever as an indoor gym shoe. But its only limitation is the frail toebox mesh that won't survive abrasive activities like rope climbs.

Putting the Cloudpulse on for the first time, we immediately noticed its platformy build. Luckily, it doesn't add that much heft to the trainer.

Showing 11.3 oz (319g) in a men's US size 9, it is only half an ounce heavier than the average. But it is notably lighter compared to the popular Nike Metcon 9 cross-trainer (11.3 oz/319g).

We found the Clouspulse's weight to be optimal for typical HIIT workouts but if you only focus on cardio and agility training, we think you might appreciate the lighter On Cloud X 3 trainer (8.7 oz/248g) more.

Wear-testing the On Cloudpulse, we could feel that our feet sat higher off the ground compared to most cross-trainers. And it proved to be true in our stack height measurements.

Our caliper showed 32.9 mm of platform thickness in the heel which is a good 8.5 mm higher than the average! As one of the tallest training shoes on our list, the Cloudpulse also offers more impact protection for high-intensity exercises with lots of jumps.

The shoe's forefoot stack also showed an above-average reading of 23.1 mm.

But because of the CluodTec midsole design which includes compressible pods, the actual stack gets lower when the shoe is loaded with the wearer's weight.

This technology also adds some bounce and responsiveness to the shoe's midsole making our steps more charged for short runs, jumping rope, and other cardio work.

Based on our caliper measurements, the difference in height between the shoe's heel and forefoot stacks comes in at 9.8 mm. This is a bit higher than the officially stated 8 mm.

This is one of the reasons why we think that the Cloudpulse is better geared for HIIT and cardio as opposed to weightlifting and Crossfit. The higher stack and drop offer more cushioning but detracts from the ground feel and stability needed for lifting heavy.

Even though we were able to lift moderate loads without a problem, things started to get wobbly and disconnected when we tried to grab more than 200 lbs (90 kg).

The Cloudpulse uses the same proprietary Helion foam as the rest of On's footwear. Pressing our Shore A durometer against it showed a reading of 25.3 HA which is on par with the training shoe average.

But even though the foam is moderately firm, it still compresses more than the typical gym shoe midsole due to the CloudTec pods.

As we already mentioned, it offers amazing impact protection but is absolutely detrimental for stability under heavy loads.

A thick well-padded insole amplifies in-shoe cushioning and comfort. In the heel, it showed a higher-than-average reading of 5.0 mm.

Even though the Cloudpulse lacked stability for more serious lifting, we have no complaints regarding its ability to support the foot laterally.

The shoe has quite a few stability elements that dutifully controlled the side-to-side movements of our feet and ankles. From its reinforced upper with a structured heel counter to the stiff full-length Speedboard and wide platform - everything helped us feel planted during the more dynamic exercises.

Ankle twisting was out of the question as the shoe's rigid midsole refused to bend in our manual test. This is in part because of the Speedboard plate that runs through the Cloudpulse's entire sole length.

On a 1-5 scale, where 5 stands for maximum stiffness, we gave this On trainer a high score of 4.

The Speedboard also extends back and protrudes up to form the base of the shoe's heel counter. It adds stiffness to the otherwise pliable shoe collar.

Our push-and-squeeze test showed that the top part of the Cloudpulse's collar can flex pretty freely. So it's nice to have the Speedboard and raised midsole sidewalls for added support at the base of the heel counter. They bumped up the shoe's heel counter stiffness score to 2 out of 5.

If you rely on a wide training shoe platform to feel and perform your best at the gym, the Cloudpulse is here to meet your needs.

This On shoe has a pretty substantial sole width in the forefoot (117.9 mm) which is almost 8 mm wider than average!

This substantial flange also ends with a stiff TPU component which enhanced our lateral stability even more. At first, we were worried that it might rub or numb our pinky toes and that was never the case during the wear tests.

The heel of the Cloudpulse also proved to be notably wider than average at 95.0 mm.

These extended contact points felt very reliable for our jump landings and one-legged exercises.

The full-length Speedboard of the Cloudpulse as well as its thicker forefoot stack certainly detracted from the shoe's flexibility.

Measuring how much force it takes to bend this On trainer to a 90-degree angle, we found that it is indeed stiffer than average. With a gauge measurement of 21.4N, it requires 20% more force than usual.

The shoe is not very forgiving for planks, lunges, and other exercises where foot bending is involved.

On delivers on promise when it says "high-grip rubber" in the product description. Even as our gym floor started to get wet from sweat and tears, the Cloudpulse never faltered us once.

With the On Cloudpulse, you can order your regular US size and go to bed peacefully knowing that you will get a well-fitting trainer tomorrow.

Measuring the shoe's internal length with a caliper, we got precisely 270.0 mm in our men's US size 9. If you are not sure of your shoe size, we highly recommend measuring your foot length and consulting On's size chart to avoid unpleasant surprises.

If you have worn On's running shoes or lifestyle sneakers already, prepare to find a notably roomier fit in the Cloudpulse.

Measuring the widest part of the shoe's toebox, our caliper showed 100.0 mm. This is wider than some other shoes from On but is on par with the training shoe average.

Training shoes are supposed to have accommodating toeboxes so that your toes have enough space to splay freely and create a more stable base for the rest of your body to lean on. This is especially important for keeping balance when doing one-legged exercises of lifting.

But what makes the Cloudpulse feel truly spacious is the square shape of its toebox. Our caliper showed 80.4 mm of width in the big toe area which is a few millimeters wider than the average you would see on shoes from On.

As someone with medium-width feet, we appreciated the extra space without feeling like our toes were swimming in the shoe. But if you have narrow feet, this could feel like too much and you may need a more streamlined silhouette.

A gusseted tongue has almost become a standard component of any performance shoe and we are happy  to see it in the Cloudpulse as well.

Even though it is semi-(not fully-) gusseted, this upper design offered a very secure lockdown for our feet. Fast-paced multi-directional movements felt well supported.

This training shoe from On has a standard no-frills lacing system that is easy to work with. The laces are flat but stay tied dutifully. Two lace holders on the tongue also help to prevent them from sliding around.

We do think that the laces could be shorter but it's not a huge problem.

There is practically no padding in the tongue of the Cloudpulse. Our caliper showed as little as 2.0 mm of material thickness in this area.

And yet, not a single lace bite!

Despite not having any finger loops, we found it easy to put on the Cloudpulse thanks to its wide shoe mouth.

It is important to note that the insole of the Cloudpulse is glued to the strobel. We cannot guarantee that removing it from the shoe would not result in compromising either part.

This On trainer will never get lost in your dark locker thanks to the reflective logo!

Environmentally cautious buyers may be pleased to know that the total amount of recycled materials in the Cloudpulse is 24%. This is courtesy of the shoe's recycled polyester upper.